Built to perform, the X-Stream® Series automatic nozzles are designed to self-adjust based on variable or reduced pressure and flow to maintain an effective stream with maximum reach. Manual models feature large handles for easy stream pattern adjustment. 12VDC electric versions include sealed connectors and motors along with a manual override.

• Flow rates: 350 – 2000 GPM (1330-7550 LPM)
• Calibrated to operate at lower inlet pressures of 75 or 80 psi (5 or 5.5 BAR)
• Straight stream, narrow fog (30°) or wide fog (90°)
• Precision cut metal teeth for exceptional fog pattern
• Durable, lightweight aluminum construction

Designed for maximum reach and penetration when combined with Elkhart Brass monitors, they are available in a variety of discharge sizes to suit any application.

Used to remove turbulence from water flow and increase stream performance, Elkhart Brass has Stream Shapers available in a variety of sizes and materials to suit all applications.

Created for specific applications where water flow may be limited, such as wildland firefighting, the 5000 Series nozzle is a high-performance, fixed flow, combination nozzle. With a 1.5″ inlet, the 5000 Series is compatible with lower flow monitors such as the BrushHawk™.

• Flow rates: 15-475 GPM (60-1800 LPM) based on stem selection
• 100 psi (7 BAR) operating pressure
• Straight stream, narrow fog (30°) or wide fog (90°)
• Spinning teeth
• Manual override
• Durable, lightweight aluminum construction

The 6000 Series is a line of selectable flow, electrically actuated Master Stream Nozzles featuring an ultra-wide flow range with a locking flow-selector ring. Useful in many applications, the 6000 Series was specifically designed for optimal performance when paired with the Sidewinder® EXM2 monitor.

• Flow rates: 15-700 GPM (60-2650 LPM)
• 100 psi (7 BAR) operating pressure
• Straight stream, narrow fog (30°) or wide fog (90°)
• Manual override
• Durable, lightweight aluminum construction

The Elkhart Brass Select-O-Stream® nozzles are constant flow with a fully machined waterway that ensures excellent stream quality. The Select-O-Stream nozzles are FM Approved.

• Brass construction for corrosive and non-corrosive environment applications
• Pattern easily changed under flowing conditions from straight stream to 90° fog
• Grease zerk fitting for easy lubrication of tip threads
• Satin and cast brass finish
• No-twist shutoff

Elkhart Brass Select-O-Flow® Master Stream nozzles are selectable flow constant flow type nozzles. The Select-O-Flow nozzle’s design enables flow rate change while nozzle is operating under flow condition.

• Brass construction for corrosive and non-corrosive environment applications
• Pattern easily changed under flowing conditions from straight stream to 90° fog
• Satin and cast brass finish

The Elkhart Brass Mystery® nozzle design has a twist shut-off feature with models flowing up to 2000 GPM (7550 LPM) maximum flow rates.

• Brass construction for corrosive and non-corrosive environment applications
• Pattern easily changed under flowing conditions from straight stream to 90° fog
• Grease zerk fitting for easy lubrication of tip threads
• Satin and cast brass finish
• Twist shutoff included

The Elkhart Brass Hydro-Foam® self-educting nozzle design enables these products to flow foam solution without the need for special foam mixing equipment. The design of the Elkhart Brass Hydro-Foam nozzle provides the flexibility and reliability required for applying foam solution.

• Built-in metering device accurately proportions foam at the selected rate
• Suitable for Class A and Class B foams including AFFF and fluoroprotein foam concentrates
• Pattern easily changed under flowing conditions from straight stream to 90° fog

Lightweight composite foam tubes are corrosion resistant and easy to handle with bases that snap securely onto the nozzle in seconds. The foam tubes are specifically designed to require no alteration of the nozzle itself for use. The base of the tube includes large air intakes. Expansion rates are easily varied with nozzle pattern.

Designed for use in fixed system applications. Adjustable nozzles can be pre-set at the factory or set in the field at time of installation. The fog pattern, which can be set up to 120°, can also easily be set or adjusted on site.