The Elkhart Brass second generation Electric Remote-Controlled Monitor (UL Class I, Div 2 ERCM) system design enables the use of a single PLC-based control panel to manage monitor and nozzle motor functions as well as serving as an Operator Control Panel (OCP).

Reliable Fire Protection Solutions for Industrial Locations

The UL Class I, Div 2 ERCM system is designed to provide a reliable industrial fire protection solution for Class I or Division 2 classified locations. The electric monitor and nozzle are FM Approved and the control panel is U.L. Listed.

Standard Panel Features

  • Up to 2000 gpm (7570 LPM) flow rate

  • Up to 300 feet (91 m) stream reach
  • 85 brass construction with a lower level of zinc for outstanding resistance to corrosion

  • Straight/jet stream to 30° narrow fog and 90° wide fog nozzle flow patterns
  • Optional 120° wide fog nozzle for gas mitigation applications
  • AC synchronous motors provide continuous oscillation capability without overloading, overheating, or blowing fuses
  • Double-race, brass bearings on vertical and horizontal swivels ensures monitor reliability and durability
  • Manual override enables manual control at any time even in the event of a power failure
  • Complies with NFPA 70

ERCM Applications

  • Oil Refineries

  • Oil Rigs

  • Tank Farms

  • Offshore Platforms

  • Fueling Areas

  • Fuel Docks

  • Chemical Processing

  • Waste Management

  • Helipads

  • Airplane Hanger

  • Railroad Yards

  • Coal Storage

  • Lumber Mills

  • Paper Mills

  • Many More…

Optional Networked Panel Features

  • Automatic horizontal oscillation

  • Communication with facility fire detection and alarm system enables system activation via fire alarm input

  • Group response enables grouping and activation of group(s) of monitors with input from fire detection system or a panic push button

  • Optional portable Radio Frequency (RF) control with up to 1000 feet (305 m) range – Up to 24 monitors per RF transmitter

  • Networkable

  • Optional touch screen HMI control for remote operation – Up to 128 monitors per system

  • Cat 5e copper networking up to 328 feet (100 meters)
  • Multi-mode fiber up to 1.2 mile (2 km)

  • Single mode fiber up to 12 miles (20km)

  • Integration with field devices such as flame and heat detection systems

8394-053 Spit-Fire® Monitor

Industrial Electric Remote Controlled Monitor; 120VAC (60 Hz) Synchronous motors; 2,000 gpm (7,570 LPM) max flow rate; 200psi (14 BAR) maximum operating; -45° to +90° (135°) max vertical travel; 347° max horizontal travel; 4.0″ 150# ANSI flange inlet; 3.5″ NHT male outlet; 85 brass with red urethane enamel; suitable Class I Division 2 classified location application, FM Approved, NFPA 70 (NEC) compliant, NEMA 4X (IP66) junction box.

FM Approved

Main Control Panel (MCP)

Main Monitor Control Panel; Suitable for Class I Division 2 classified location; Factory configured for 3.2A@240VAC 60 Hz input power; factory configurable for 50 hz; field configurable for 120VAC or 480VAC; networkable; /Alarm Input / Group Response over ethernet network; 304 Stainless Steel NEMA 4x enclosure; UL Listed, complies with NFPA 70 (NEC).

  • Optional 304 and 316 Stainless Steel NEMA 4x Enclosure or painted carbon steel NEMA 4 Enclosure
  • Optional gland plate
  • Optional multi-mode fiber optic network module
  • Optional auxiliary device controls

Networked Operator Control Panel (OCP)

Optional Operator Control Panel (OCP); Suitable for Class I Division II classified location; 6.3A/3.2A @120/240VAC 50/60 Hz; networkable; Alarm Input / Group Response over ethernet network; 304 Stainless Steel NEMA 4x enclosure; UL Listed, complies with NFPA 70 (NEC).

  • Optional Hazardous Location rated (Class I Division 2)
  • Optional 304 and 316 Stainless Steel NEMA 4x Enclosure or painted carbon steel NEMA 4 Enclosure
  • Optional gland plate
  • Optional multi-mode fiber optic network module
  • Optional auxiliary device controls

Hardwired Operator Control Panel

Optional Operator Control Panel (OCP); Power derived from MMCP; 304 Stainless Steel NEMA 4x Enclosure; UL Listed, complies with NFPA 70 (NEC).

  • Optional Hazardous Location rated (Class I Division 2)
  • Optional 316 Stainless Steel NEMA 4x Enclosure or painted carbon steel NEMA 4 Enclosure
  • Optional gland plate
  • Optional auxiliary device controls

GEN-II XT Extreme Temperature Panels available with higher temperature range

Optional RF Control

Optional RF control enables portable Radio Frequency (RF) control; 1000 feet (305 m) RF control range; networkable with up to 24 monitors per network system.

  • Custom control buttons and switches are availableDiv. 2, Groups C and D, T5 Class II, Div. 2 Groups E, F, and G, Class III:T4

Optional Touch Screen Remote Control Console

Optional remote control console; 100-120VAC @ 2.1A input power; painted carbon steel; touch screen; supports up to 128 monitors.

  • 220-240VAC @ 1.0A optional input power
  • Optional wall-mount, free-standing console, or desktop
  • Consolette enclosures
  • Optional fiber communication connections
  • Optional EWON device (for remote system access for troubleshooting and support)
  • Optional Ergonomic Multi Axis Joystick (on free standing console only)

Optional Motor Operated Valve (MOV)

  •  4.0″ Electric Butterfly Valve
  • Can be used on remote controlled monitor systems
  • Temperature range: -40 to 149°F; Stainless Steel valve with EPDM seat; 120-240VAC 50/60 Hz., 1-phase operating power; NEMA 4, 4x and 6, IP66/68; operating pressure – 150 PSI
  • FM Approved: Class I Zone 1; AEx/Ex de IIB T5: Acceptable for Class I, Div. 2, Groups C and D, T5 Class II, Div. 2 Groups E, F, and G, Class III:T4

FM Approved

Videos

File Description File Type Link
GEN II-Networked Control Panel pdf
GEN II-Networked Control Panel – Non Hazardous pdf
Hardwired Monitor Motor Control Panel pdf
Monitor Motor Control Panel pdf
Spitfire Monitor Parts Drawing pdf
Web – 8394053 Electric Monitor With Nozzle pdf
File Description File Type Link
EWON COSY 131 Network Router pdf
HMI Manual 98559000 pdf
Industrial Systems

839405_Gear Case Retrofit Instructions

pdf
Industrial Systems – Electric Butterfly Valves pdf
Industrial Systems – Monitor Manual pdf
The Hardwired MCP Manual 98386200 pdf
The Networked MCP Manual 98606200 pdf
The Networked RF Manual 98386300 pdf
X-Stream Manual pdf
File Description File Type Link
CE Certification

Certification Type: PED
Product Description: 8394-02 Spit-Fire Manual Monitor

pdf
Datasheet – Industrial Valve pdf
Datasheet – Industrial X-Stream Series Nozzle pdf
Frequently Asked Questions pdf
Industrial System Panel Configurator xlsx
Motor & Gearcase Explanation pdf
Performance Document – Spit-Fire pdf
File Description File Type Link
Industrial Fire Protection Redefined pdf